Folder SD Card Holder (1 x SD, 2 x MicroSD)
The Folder SD Card Holder is a 3D-printed case shaped like the classic folder icon.
Printed by usfrom £8.80
- Dimensions
- 73 x 51 x 8.4
- Recommended material
- PLA
- Estimated weight
- 18 g (PLA)
- Estimated print time
- 30 min
- Estimated print cost
- from £8.80
- Purpose
- Organise
- Occasion
- Everyday
Estimated in PLA at 0.2 mm layers and 20% infill, including handling. Your exact price comes with the quote.
Model by Tap3D · Licence: Tap3D design
Download from
About this model
The Folder SD Card Holder is a 3D-printed case shaped like the classic folder icon. It opens on a hinge, closes with a satisfying magnetic click, and keeps every card in its own pocket. It is still a prototype, and we are sharing it early so you can help us make it better.
Your desktop, on your desk.
We all have them: SD cards from the camera, microSDs from the drone, the Raspberry Pi and the 3D printer, scattered across drawers and bags. We wanted one small, good-looking place to keep them. Since these cards hold our files anyway, it seemed only right to give them a folder.
Sizes and specs
| Size | Holds | Dimensions (W × H × D) |
|---|---|---|
| Small | 1 × SD + 2 × microSD | 73 × 51 × 8.4 mm |
| Medium | 2 × SD + 2 × microSD | 88 × 59 × 8.4 mm |
| Large | 4 × SD + 6 × microSD | 119 × 80 × 8.4 mm |
Every size needs two 10 × 2.5 mm neodymium magnets and a short piece of 1.75 mm filament for the hinge.